Mode switch, sleep mode, language

Global function settings

Preview Window

Firmware preview, firmware burning

Mode Settings

Turntable weight (damping) setting

Switch mode button, select the mode in A2 and click the button to take effect

Mode List

Displays whether 1P is connected. If not, it will be gray.

Displays whether 2P is connected. If not, it will be gray.

Ignore the Windows scaling function. If 125%, 150%, or 200% is set on Windows, you can force it to display at 100%.

Sleep function: After 1-10 minutes, RED-LMS will turn off all lights. Press any button or turn the turntable to restore the lights.

Select the language you are used to. The languagepack.xml file can be modified at will to add the language you are used to.

The time it takes to process jitter when releasing a microswitch. The default value of 3ms is recommended.
If you experience multiple reactions when using a VX-01-1C22 or VX-01-1C23 microswitch,
increasing this value may partially improve the situation.

The time it takes to process jitter when a microswitch is pressed. The default value of 10ms is recommended.
If you experience multiple responses when using a VX-01-1C22 or VX-01-1C23 microswitch,
increasing this value may partially improve the situation.

The time it takes for the button light to turn off when the button is released. Usually it is recommended to be between 0-200ms;

Restore the factory settings of the buttons.

The time interval between turntable reversals.
Only on the EZ2ON, the turntable is set to 2 keys. It needs to be set to 8ms or higher.
Otherwise, input loss may occur at the EZ2ON's high-speed turntable.
The recommended default value is 0ms;

The recommended value is 20-100ms. The smaller the value, the faster the speed is required to
trigger the turntable. The larger the value, the slower the speed is.
The recommended default value is 100ms;

It can be understood as sensitivity. The smaller the value, the higher the sensitivity.
The value represents the angle that the turntable needs to rotate to output the value.
The recommended default value is 6 (according to our tests, we think 6 is closer to the arcade effect). You can make fine adjustments based on your own physical sensations.
For players of high-difficulty turntable songs, you can set it to 2;

It can be understood as the sensitivity of the turntable reversal. The smaller the value, the higher the sensitivity.
The value represents the angle that the turntable needs to rotate to reverse the output value.
The recommended default value is 4 (according to our tests, we think 6 is closer to the arcade effect). You can make fine adjustments based on your own physical sensations.
For players of high-difficulty turntable songs, you can set it to 2;

When using 1:2, a slower turntable speed can trigger fast scrolling of the song selection menu;
When using 1:4, you need to use a higher speed to trigger the fast scrolling of the song selection menu;
The recommended default value is 1:4 (according to our tests, 1:4 is closer to the arcade effect);

The time when the turntable damping is triggered;
If the value is small, there will be no damping effect when turning the turntable slowly;
At critical speeds, a jagged turntable feel will appear.
The recommended default value is 40ms;

The current damping level of the turntable.
The specific value of damping level uses the value settings of the F zone.

It represents the angle at which the turntable must be rotated before a damping effect occurs.
The larger the value, the greater the angle required to rotate before a damping effect occurs.
You can try 2~16 to see how it feels.

Restore the turntable settings to factory defaults.

Set the button lighting brightness.

Set the turntable light brightness.

Select the turntable lighting effect.

Click C1 or C2 to set the corresponding turntable light color.
Cannot be set in rainbow color mode.

Restore lighting settings to factory defaults.

Displays the voltage currently provided by the PD power supply.
20V and 15V are the recommended operating voltages;
12V can be used for a long time;
9V can work, but it is not recommended to use it for a long time;
At 5V, electromagnetic damping does not work;
0V, PD power supply not plugged in;

The original value of the turntable data does not participate in the actual output.

Displays the currently pressed keys.

Switch the physical locations of 1P and 2P.
It is not recommended to click this button unless the main control PCBA needs to be replaced.

Display the current hardware version and firmware version

Click to burn the firmware

Click to open the window and select the firmware you want to burn.

Restore all parameters to factory settings.
(Will not affect the life of the product)

Displays the absolute value of the current 1P and 2P turntable output X axis

1P and 2P turntables simulate in-game output

Independently set the parameters of 1P and 2P in this mode.

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P

Restore the current mode to default values

FN1, FN2 can be freely mapped to any keyboard value

Specify 1P turntable and 2P turntable output X-axis or Y-axis

X-axis, Y-axis forward or reverse

Display the current X-axis and Y-axis values in real time;

Simulate the state of Turntable output in the game

Independently set the parameters of 1P and 2P in this mode

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P

If checked, the damping data from spiceXXX will be automatically applied to the values of LEVEL1-LEVLE10.
Unchecked, the current LEVEL specified in IIDXOLLER Options will be used.

If checked, the button will receive the spiceXXX downstream button light data.
Unchecked, the button will light up when pressed.

Check this to receive the downstream turntable light data from spiceXXX (only single color, if you want to use the ring light effect and color specified by IIDXOLLER Options, please do not check this)

When performing Double Play on INFINITAS, select E1 or E4 as the Start button according to your preference.

Restore the current mode to default values

FN1, FN2 can be freely mapped to any keyboard value

Simulate the state of Turntable output in LR2

Independently set the parameters of 1P and 2P in this mode

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P

Check this, press E1 and turn the 1P turntable to adjust the LaneCover of 1P.

Check this, press E2 and turn the 1P turntable to adjust the 1P LIFT.

Check this, press E4 and turn the 2P turntable to adjust the 2P LIFT.

Restore the current mode to default values

FN1, FN2 can be freely mapped to any keyboard value

Turntable output as analog

Turntable output as two different key values

Select Turntable as X-axis or Y-axis

The value of Axis is increasing or decreasing

Display the current X-axis and Y-axis values in real time;

Simulate the state of turntable output in beatoraja

Independently set the parameters of 1P and 2P in this mode

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P

Restore the current mode to default values

All buttons can be customized.

Use the mouse to click the button and press the keyboard key to complete the key value customization.

Clear the currently bound key value.

Turntable output as mouse.

Turntable output as keyboard value.
Clockwise and counterclockwise can map the same keyboard value.

Select turntable as X-axis or Y-axis.

The value of Axis is increasing or decreasing

Preview the increase and decrease of the current Turntable value.

Simulate the state of turntable output in the game.

Independently set the parameters of 1P and 2P in this mode.

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P

Restore the current mode to default values

Custom key value, which can be set to any key value in DS4.

Select the key value from the drop-down menu and it will take effect immediately.

Turntable output as Axis.

Turntable output as a key value, which can be mapped to two identical key values or different key values;

Select the corresponding Axis for Turntable.

The value of Axis is increasing or decreasing.

The value of the Axis currently output by Turntable.

Simulate the state of turntable output in the game.

Independently set the parameters of 1P and 2P in this mode.

Check to use the global settings;
If unchecked, the global settings will be ignored and the parameters set in this mode will be used;

Set common parameters for 1P and 2P.

Restore the current mode to default values.

Damping digital input box, the larger the value, the greater the damping.

Click the button to save the current value;
or press Enter to save the current value.

Restore factory default values